Maglock Repair in Burbank, CA
Burbank · ZIP 91502, 91505, 91506 · San Fernando Valley · Magnetic Locks & Electric Strikes

Few things disrupt a property faster than an entry system that doesn't work. So Burbank property owners call Los Angeles Access Control for maglock repair — rapid response, flat, written quotes, and installations done to code.
Estimates are free, every price is written down before we start, and our workmanship is warrantied. Dial (888) 917-9811 — we're available Sunday–Thursday 6:30 AM–11:30 PM and Friday 6:30 AM–4 PM.
Why Burbank properties choose us for maglock repair
Burbank sits in the San Fernando Valley, and we know it street by street. Whether your property is near the Media District studios and Burbank Town Center, and anywhere off the SR-134, we arrive with local knowledge of the construction styles typical of the 91502 area — aluminum storefronts, wood-frame offices, stucco multifamily walk-ups and tilt-up industrial shells — which means fewer surprises and faster installs.
Beyond Burbank, the very same technicians handles Toluca Lake, Universal City, Hollywood Hills and Glendale, so multi-site owners get a single point of contact across every site: (888) 917-9811.
Key terms, plainly explained
Anti-passback — a rule preventing a credential from entering twice without exiting, used in parking and high-security zones.
Access level — which doors, at which times, for which users. Good access-level design is the difference between a tidy system and chaos.
Request-to-exit (REX) — hardware that detects someone leaving and releases the lock so egress is always free.
Fail-safe vs. fail-secure — what a lock does when power drops: fail-safe releases (required for some egress doors), fail-secure stays locked (most strikes). Each opening gets the right one per code and risk.
Door position switch (DPS) — the contact that tells the system the door's true state, enabling held-open and forced-door alarms.
OSDP — the modern, encrypted reader protocol replacing legacy Wiegand wiring that resists skimming and tamper.
Maglock repair: what we install and service
Every installation covers the full stack of hardware: bond sensors, armature alignment hardware, exit device wiring, along with power supplies and rectifiers. We don't leave half-finished systems — every conductor is labeled, panels are documented, and administrators are trained at handoff.
Every opening receives hardware matched to its construction: fail-safe or fail-secure locking chosen per egress requirements, weather- and vandal-rated readers where needed, and supervised power with backup batteries. Skipping that engineering is why bargain installs fail early — ours are built to run for a decade.
How a maglock repair project works
1. Site survey. One of our techs surveys the property with you, documenting door and frame construction, existing wiring, power availability and network paths. This produces a detailed proposal — not a guess.
2. System design. We pair hardware for each opening, size power supplies with battery backup, plan controller and network locations, and confirm fire and egress code compliance before anything is ordered.
3. The install. In-house technicians — not subcontractors — pull and label every cable, mount hardware square and solid, and keep the site workable so your operation never stops.
4. Configuration. Credentials are enrolled, time zones and holidays programmed, alerts configured, and any integrations brought online.
5. Testing and training. Every credential is tested at every relevant door, and your administrators are trained hands-on — with documentation left on site and on file with us.
6. Ongoing support. Your system's documentation lives in our service records, which means any tech we send already knows your site. Preventive maintenance plans are offered but never required.
Property types we serve in Burbank
Commercial gates — one of our most frequent project types, with proven hardware packages ready to quote.
Storefronts — a property type we've equipped many times across LA County, with proven hardware packages ready to quote.
Apartment entries — one of our most frequent project types, with reference sites we're happy to describe.
Offices — for which we tailor traffic patterns, user counts and liability exposure, down to schedules and alert rules.
Have an unusual building? We've likely done it — from marinas to machine shops. Call (888) 917-9811 and we'll talk through options.
Avoid these common missteps
Old cards left active. An upgrade that keeps the old database keeps the old holes. A credential audit belongs in every takeover.
Undocumented installs. No as-builts means the next tech starts blind. Documentation should be a deliverable, not a favor.
Undersized power. Behind most "haunted" systems is a starved power supply — proper sizing with battery backup prevents years of mystery faults.
Proprietary lock-in. Some vendors install hardware only they can service. Ask who else could service it before you sign
Pricing without a site visit. The unknowns get billed later or botched. A real survey protects you — ours are free.
What Burbank owners type into the search bar
However you got here — searching "magnetic gate lock repair", "electromagnetic lock repair", "magnetic lock repair" or a phrase like them — the service behind the words is identical: a licensed technician, the right hardware, and a system commissioned to code in Burbank.
Questions that ride along with this one often involve maglock not working, maglock repair near me, magnetic lock power supply replacement, magnetic lock not releasing and magnetic lock maintenance. If any of those apply to your property, mention them during the survey — scoping them together is where the savings hide.
The reasons customers stay with us
Specialists, not generalists. Entry systems are our entire business — not a sideline bolted onto an alarm company.
Warrantied workmanship. Every installation carries labor and parts warranties, honored fast.
Non-proprietary by default. Open standards mean you own your system — and our service keeps you with us by choice, not contract.
Local and accountable. Headquartered at 189 The Grove Drive in Los Angeles, serving every corner of LA County daily. When something needs attention, we're minutes away — not a ticket queue in another state.
Written, flat quotes. The number you approve is the number you pay. No surprise line items.
Long hours, real answers. Available Sunday–Thursday 6:30 AM–11:30 PM and Friday to 4 PM. Because locked-out tenants and failed storefront doors can't wait until Monday.
Equipment standards we trust
Credential technology matters more than most owners realize: old low-frequency prox is trivially copied, whereas modern smart cards and phone credentials are encrypted. Part of every survey is a frank read on your current credential security.
On the wire side, we're moving customers from Wiegand to OSDP — supervised, encrypted reader communication that resists skimming and cut-wire attacks. Most modern readers support it already; ask us whether your wiring qualifies.
Comparing your options
Standalone systems work for small scopes: self-contained hardware with onboard programming. What you give up is central control — changes happen at the door, and there's little or no audit trail.
Networked on-premise systems put every door on one brain: powerful and subscription-free, but someone has to own that server, its backups and its updates. They shine in facilities that already have IT staff.
Cloud access control swap server headaches for a monthly fee: everything is managed from anywhere, failover keeps doors working through internet outages. For most LA businesses this is the default recommendation — though we'll say so only if it actually fits yours.
Unsure which fits? That's what the free survey answers — we'll recommend the cheapest option that actually solves your problem, and put the reasoning in writing. (888) 917-9811.
Pricing factors for maglock repair
Honest answer: price follows scope — but it's knowable fast. Cost is driven by: how many openings, door and frame construction, wiring distance and pathway difficulty, credential technology, and the locking hardware each opening needs.
Be cautious with quotes that arrive without a site visit: they're either padded for the unknown or destined for change orders. Our surveys are free, usually in under an hour, and lock your price in writing.
Signs it's time for maglock repair
You've lost track of how many keys or credentials are in circulation — every unknown copy is an open question about who can walk in.
Something went missing and the entry log is a shrug — an event history would have answered it in minutes.
Your existing system is down more than it's up — past a point, stabilizing legacy hardware costs more than replacing it.
Doors get propped because entry is inconvenient — and a propped door defeats every lock you own.
Insurance, compliance or a client audit is asking questions you can't answer — documented access control is becoming table stakes in many industries.
Any one of these justifies a conversation; stacking several means the risk is live. A phone consult costs nothing: (888) 917-9811.
The security details that separate good installs from bad ones
Attackers go around strong points, not through them: a hardened entry next to an unmonitored side door is a diagram of where the loss will happen. Our surveys look at the building the way an intruder would, so spend lands where risk actually lives.
Think about failure modes before they happen: what happens in a blackout, a network outage, a fire alarm, an earthquake — each has a correct, code-driven answer that gets engineered in, tested during commissioning, not during the real thing.
Scheduling, emergencies and follow-through
Entry failures rarely pick convenient moments, so our dispatch hours are long — Sunday–Thursday 6:30 AM to 11:30 PM and Friday to 4 PM — with same-day capacity reserved for urgent calls: a storefront that won't lock, a gate stuck open, a lobby door trapping deliveries. Describe the symptom when you call and you'll get an honest triage — if it can safely wait for a standard slot, we'll tell you.
The job doesn't end at the invoice: your documentation stays on file, warranty support is a phone call, and future additions quote quickly because we already know your site.
Burbank service footprint
Jobs here run across ZIP codes 91502, 91505 and 91506, taking in Hollywood Burbank Airport and Burbank Town Center as well as the Media District studios. Positioned in the San Fernando Valley, with the I-5 nearby, response windows here are among our best.
The same maglock repair service extends to: Toluca Lake, Universal City, Hollywood Hills, Glendale and North Hollywood. Multi-property owners across these cities consolidate them under one service relationship — one number to call for all of it: (888) 917-9811.
Life-safety and code requirements
If a bidder never mentions egress, keep interviewing. Maglocks in particular carry strict egress requirements: sensor release, auxiliary push buttons, fire-alarm disconnects and time delays per the California Building Code. Our installations pass inspection because they're designed for inspection — permits included where the AHJ requires them.
ADA matters too: reader mounting heights, operating force, auto-operator coordination and clear floor space shape where and how devices mount. Getting it right during design costs nothing; retrofitting it after a complaint is expensive.
Problems we solve every week
Magnetic lock not holding. We see this constantly — so the repair includes the reason it failed.
Exit button not dropping the lock. We see this constantly — so we correct the underlying design, not just the broken part.
Magnetic lock not releasing. It's among our most common calls — so the repair includes the reason it failed.
Doors slamming or bouncing off the armature. The right hardware and programming make this a non-issue — usually faster than owners expect.
Left alone, these issues get costlier: an unsecured door invites loss, and a stuck one blocks business. Same-day and next-day appointments is the norm at (888) 917-9811.
Maglock Repair in Burbank: FAQs
Do you give free estimates?
Yes — estimates cost nothing and you're never pressured. You receive a written scope with real hardware and a fixed price before any work begins.
Is maglock repair disruptive to my business while it's installed?
Minimally. Openings are kept functional during the day, schedule noisy or door-down phases around your hours, and leave the site clean daily. Occupied buildings are our normal condition.
How long does an installation take?
One door: usually a day. Larger systems scale with door count and wiring difficulty — your written quote includes a schedule, and we keep to it.
Can I get temporary access for vendors, cleaners or contractors?
Yes — scoped, expiring credentials are one of the biggest wins: vendors receive limited credentials that expire on their own, with every entry logged. No more lending master keys.
Do you work on occupied buildings without disrupting tenants?
Yes, most of our work is in occupied buildings. We stage the work so entries keep functioning and coordinate notice with your manager.
Can you integrate with cameras, alarms or my property software?
In most cases, yes — video, intrusion, elevator and PMS integrations come up on most projects. Bring your current system list to the survey and we'll map what connects.
Do you offer maintenance plans?
Yes — preventive visits covering batteries, firmware, testing and documentation, on terms you can cancel. No plan is ever required — the install is built to last regardless.
Is financing or phased installation available for larger projects?
We phase large projects all the time: secure the critical doors first, add the rest on your budget's schedule, with the design planned so later phases bolt on cleanly.
What brands do you install?
Professional, non-proprietary lines including HID, Brivo, Avigilon Alta (Openpath), DoorKing, ButterflyMX and Axis, plus locking hardware from Von Duprin, HES, Securitron and Schlage. We spec to your building, not to a quota.
Can you service a system another company installed?
In most cases, yes. We regularly take over systems whose installer disappeared — stabilizing them, recovering admin access and bringing documentation up to date so you're never stranded again.
How fast can you schedule maglock repair in Burbank?
The majority of service calls get same- or next-day slots, and new installations typically begin within days of an approved quote. Phones are answered Sunday–Thursday 6:30 AM–11:30 PM and Friday to 4 PM at (888) 917-9811.
Are you licensed and insured?
Absolutely. Los Angeles Access Control operates as a licensed and insured contractor performing work across Los Angeles County, and we pull permits where the jurisdiction requires them.
Will the doors still open if the power goes out?
Yes, that's engineered in. Exiting is always possible: hardware is selected per code so people can always exit, and battery-backed power rides through typical outages. We test exactly this during commissioning.
What happens when an employee or tenant leaves?
Their credential is deactivated in seconds — no rekeying, no lock changes, no cost. That single capability usually pays for the system.
Can I manage the system from my phone?
On modern cloud systems, absolutely: remote unlock, credential changes and real-time alerts from wherever you are. Ask for a demo at your survey.
Do you handle both installation and ongoing service?
Yes — and that continuity is the point. Your as-builts, programming records and parts list stay in our file, which makes every future visit faster.
Can the system lock and unlock doors on a schedule?
Absolutely: auto-unlock during business hours, auto-secure at night, including holidays and special dates. No more "who forgot to lock up".
More Magnetic Locks & Electric Strikes in Burbank
Maglock Repair in nearby cities
Explore
Book maglock repair in Burbank
Licensed, insured and local. Fast scheduling across Los Angeles County — written quotes, warrantied work.
Call (888) 917-9811Sun–Thu 6:30 AM–11:30 PM · Fri 6:30 AM–4 PM