Magnetic Lock Installation in Cheviot Hills, CA
Cheviot Hills · ZIP 90064 · Westside · Magnetic Locks & Electric Strikes

Los Angeles Access Control handles professional magnetic lock installation for commercial and residential properties in Cheviot Hills. From survey to sign-off, our own technicians own the entire project — cabling, locks, readers and credentials included.
Quotes cost nothing, you approve a written number before any work starts, and labor and parts are warrantied. Dial (888) 917-9811 — we're available Sunday–Thursday 6:30 AM–11:30 PM and Friday 6:30 AM–4 PM.
Magnetic lock installation built for Cheviot Hills
Dispatching Cheviot Hills daily means our estimates reflect real local conditions. Buildings near Motor Avenue tend to combine decades of legacy wiring with newer tenant improvements, and our techs carry the interface modules, power supplies and retrofit brackets that those jobs demand. Being minutes off the I-10, emergency calls in 90064 are reached quickly.
Beyond Cheviot Hills, the very same team handles Rancho Park, Beverlywood, Palms and Century City, which means property managers with scattered portfolios enjoy one vendor, one standard, one phone number: (888) 917-9811.
Beyond the reader: real-world security engineering
Attackers go around strong points, not through them: a hardened entry next to an unmonitored side door is a diagram of where the loss will happen. Our surveys look at the building the way an intruder would, so spend lands where risk actually lives.
Good design assumes bad days: power loss, dead internet, alarm activation — each has a correct, code-driven answer that gets engineered in, tested during commissioning, not improvised during the event.
Problems we solve every week
Doors that can't take a strike cutout. Correct design removes this risk — often faster than owners expect.
Code-compliant egress on locked doors. It's among our most common calls — so the repair includes the reason it failed.
Frameless glass entries needing locking. It's among our most common calls — and our fix addresses the root cause, not the symptom.
High-traffic doors wearing out mechanical locks. The right hardware and programming make this a non-issue — often in a single service visit.
If any of these sound familiar Phone (888) 917-9811 and describe the symptom — we can often diagnose over the phone, which keeps the visit short and the invoice small.
How a magnetic lock installation project works
1. Site survey. A technician walks every door, gate and opening in scope, noting door and frame construction, existing wiring, power availability and network paths. You get an itemized scope and quote — no vague allowances.
2. System design. We pair specific hardware per door, size power supplies with battery backup, plan controller and network locations, and verify life-safety compliance up front.
3. The install. In-house technicians — not subcontractors — pull and label every cable, fit hardware precisely, and keep the site workable with minimal disruption.
4. Programming. Credentials are enrolled, time zones and holidays programmed, alerts configured, and any integrations brought online.
5. Testing and training. Each opening is tested under power loss, egress and forced-entry conditions, and whoever manages the system gets real training — with documentation left on site and on file with us.
6. Service after the sale. We keep your as-builts, programming records and parts list on file, which means future service calls are fast. Preventive maintenance plans are offered but never required.
Inside a professional magnetic lock installation project
We handle it all — Z and L brackets for inswing doors and glass door U-brackets, down to armature plates and brackets and request-to-exit devices. Since one team handles hardware, low-voltage wiring and software alike, there's no finger-pointing between trades.
Each door gets components chosen for its actual door and frame: fail-safe or fail-secure locking chosen per egress requirements, weather- and vandal-rated readers where needed, and power sized with headroom for battery backup. That matching step is where cut-rate installs go wrong — and where ours last for years.
Comparing your options
Single-door standalone systems work for one or two doors with simple needs: a coded lock or single-door controller, no network, minimal cost. The trade-off is management — changes happen at the door, and there's little or no audit trail.
On-premise panels remain the right call for owners who want zero recurring fees — we install plenty of them — with the caveat that software upkeep falls on you or a service plan.
Cloud systems have become our most-requested configuration: manage every door from a browser, updates arrive automatically, and multi-site portfolios live in one dashboard. You pay a subscription, and for most owners it replaces costs they were already paying in service calls.
Not sure where you land? The free site survey settles it — we'll recommend the cheapest option that actually solves your problem, with reasoning you can hold us to. (888) 917-9811.
Search terms that lead here — and why
However you got here — searching "double door magnetic lock installation", "storefront magnetic lock installation", "magnetic lock and buzzer system installation" or a phrase like them — the underlying work is the same: professional magnetic lock installation done once, done right, in Cheviot Hills.
Related work we handle under the same roof includes magnetic lock installation, single door maglock installation, magnetic lock exit button installation, magnetic lock installation cost and maglock system. Bundling related scopes into one visit almost always costs less than piecemeal calls — one truck roll, one survey, one accountable vendor.
Why Cheviot Hills calls us first
Non-proprietary by default. We install open-platform systems you could have anyone service — though most customers never want anyone else.
Local and accountable. Based at 189 The Grove Drive in Los Angeles, serving every corner of LA County daily. When something needs attention, we're minutes away — not a ticket queue in another state.
Transparent pricing. Prices are quoted in writing before work starts. Change orders only happen when you change the scope.
Warrantied workmanship. Labor and manufacturer warranties on everything we install, honored fast.
Long hours, real answers. Open Sunday–Thursday 6:30 AM–11:30 PM and Friday to 4 PM. Because locked-out tenants and failed storefront doors can't wait until Monday.
Specialists, not generalists. Entry systems are our entire business — not a line item for a general electrician.
The compliance layer most installers skip
Locking a door electrically touches fire code, building code and ADA at once. California's Building Code and Fire Code dictate how locked egress doors must release: free mechanical egress, fail-safe unlocking on fire alarm, request-to-exit coverage and proper signage as each opening requires. Compliance is engineered in before security — security never overrides safe exit.
Documentation is part of compliance: as-built drawings, door schedules, release mechanisms and test records stay with your file, so fire marshals, insurers and future contractors get answers in minutes.
The technology behind the system
Our bench covers the industry's main platforms: HID readers and credentials, Brivo and Avigilon Alta (Openpath) cloud access control, DoorKing and ButterflyMX entry systems, Axis door controllers, plus the trusted locking brands — Von Duprin, HES, Securitron, Schlage. We spec brands to the job, never to a sales quota.
On the wire side, OSDP is replacing Wiegand — supervised, encrypted reader communication that resists skimming and cut-wire attacks. Most modern readers support it already; we verify compatibility during the survey.
Pricing factors for magnetic lock installation
The honest answer: price follows scope — and we can pin it down quickly. The main drivers are: number of doors or gates, what each door is made of, how far and how hard the cable runs are, reader and credential choice, and whether locking hardware must be added or replaced.
Be cautious with quotes that arrive without a site visit: unknowns get billed later one way or another. Our surveys are free, usually in under an hour, and lock your price in writing.
Mistakes to avoid when buying magnetic lock installation
Leftover legacy credentials. Takeovers that don't purge unknown credentials inherit every old risk. We audit and purge on every system takeover.
Security that traps people. A maglock without compliant release mechanisms is a violation and a liability. Compliance has to be in the design, not patched after.
No documentation. No as-builts means the next tech starts blind. Demand as-builts and admin credentials in writing.
Proprietary lock-in. Certain platforms handcuff you to one company forever. Always ask: "who else can work on this?"
Cheap power supplies. The most common root cause of flaky systems we're called to fix — proper sizing with battery backup prevents years of mystery faults.
Jargon decoded
Anti-passback — logic that stops one fob from being passed back to admit a second person, common in garages and secured floors.
Credential — whatever unlocks the door: fob, badge, code, smartphone or biometric. Modern encrypted credentials resist the cloning that plagues older prox cards.
Fail-safe vs. fail-secure — what a lock does when power drops: fail-safe unlocks (required for some egress doors), fail-secure holds (typical for perimeter security). Each opening gets the right one per code and risk.
OSDP — the modern, encrypted reader protocol replacing legacy Wiegand wiring that resists skimming and tamper.
Request-to-exit (REX) — the sensor or button that releases a locked door from inside so exit never requires a credential.
Door position switch (DPS) — a sensor reporting whether the door is physically open or closed, the basis for propped-door and forced-entry alerts.
Scheduling, emergencies and follow-through
Entry failures rarely pick convenient moments, so our dispatch hours are long — Sunday–Thursday 6:30 AM to 11:30 PM and Friday to 4 PM — with same-day capacity reserved for urgent calls: failed storefront locks, stuck gates, dead lobby entries. Tell the dispatcher the symptom and we'll triage honestly — not everything needs an emergency rate, and we'll say so.
The job doesn't end at the invoice: your documentation stays on file, warranty support is a phone call, and future additions quote quickly because we already know your site.
Coverage details: ZIP codes, corridors and surrounding areas
Jobs here run across ZIP code 90064, taking in Rancho Park and Motor Avenue as well as the Cheviot Hills Recreation Center. As part of our Westside routes, minutes from the I-10, response windows here are among our best.
The same magnetic lock installation service extends to: Rancho Park, Beverlywood, Palms, Century City and Culver City. Owners with properties in more than one of these areas typically put everything under one account — a single point of contact: (888) 917-9811.
Signs it's time for magnetic lock installation
Something went missing and the entry log is a shrug — an event history would have answered it in minutes.
Nobody can say how many keys exist for your doors — each one is standing access you can't revoke.
People prop doors to avoid fumbling with keys — and a propped door defeats every lock you own.
Insurance, compliance or a client audit is asking questions you can't answer — documented access control is becoming table stakes in many industries.
Your existing system is down more than it's up — past a point, stabilizing legacy hardware costs more than replacing it.
One of these alone is reason enough to call; two or more mean you're already carrying risk. The call is free: (888) 917-9811.
Who uses this service
Frameless glass entries — one of our most frequent project types, with reference sites we're happy to describe.
Pedestrian gates — one of our most frequent project types, with proven hardware packages ready to quote.
Aluminum storefront doors — a property type we've equipped many times across LA County, with reference sites we're happy to describe.
Office suites — a property type we've equipped many times across LA County, with proven hardware packages ready to quote.
Don't see your property type? Odds are we've equipped one like it — from marinas to machine shops. Call (888) 917-9811 and we'll talk through options.
Magnetic Lock Installation in Cheviot Hills: FAQs
What if my building already has old wiring from a previous system?
Often good news: sound existing cable can frequently be reused, which cuts labor significantly. The survey includes testing what's in the walls — reuse what passes, replace what doesn't.
Do you work on occupied buildings without disrupting tenants?
Yes, most of our work is in occupied buildings. Doors stay usable during the day, noisy work is scheduled considerately, and tenants get notice through management.
Are you licensed and insured?
Absolutely. Los Angeles Access Control is a licensed, insured low-voltage contractor working across Los Angeles County, and we pull permits where the jurisdiction requires them.
Can you integrate with cameras, alarms or my property software?
In most cases, yes — door events paired with video clips, alarm tie-ins, elevator control and property-management integrations come up on most projects. Bring your current system list to the survey and we'll map what connects.
What happens when an employee or tenant leaves?
You deactivate the fob, card or phone credential instantly — no rekeying, no lock changes, no cost. For most owners this alone justifies the switch from keys.
How fast can you schedule magnetic lock installation in Cheviot Hills?
Most repairs get same- or next-day slots, and installs usually start within the week. Phones are answered Sunday–Thursday 6:30 AM–11:30 PM and Friday to 4 PM at (888) 917-9811.
Can the system lock and unlock doors on a schedule?
Yes — schedules are standard: auto-unlock during business hours, auto-secure at night, with holiday calendars and exception dates handled automatically. No more "who forgot to lock up".
What brands do you install?
Industry-standard platforms including HID, Brivo, Avigilon Alta (Openpath), DoorKing, ButterflyMX and Axis, with commercial-grade locking hardware throughout. The building's needs pick the brand.
What happens to my system if your company weren't around?
We invite that question: open platforms, delivered documentation and your own admin access mean you're never stranded. We earn retention through service, not hostage-taking.
How long does an installation take?
One door: usually a day. Multi-door projects run from a few days to a few weeks depending on count and conditions — the timeline is part of your written proposal, and we hit it.
Do you give free estimates?
Yes — site surveys and quotes are free and carry no obligation. You receive a written scope with real hardware and a fixed price before any work begins.
Can you service a system another company installed?
In most cases, yes. We take over orphaned and legacy systems — stabilizing them, recovering admin access and bringing documentation up to date so you're no longer dependent on whoever vanished.
Will the doors still open if the power goes out?
Yes, that's engineered in. Exiting is always possible: fail-safe hardware unlocks on power loss where code requires, and battery backup keeps systems running through outages. We test exactly this during commissioning.
Can I manage the system from my phone?
With cloud-based platforms, yes: remote unlock, credential changes and real-time alerts from any browser or the mobile app. We'll show you a live demo before you decide.
Do you handle both installation and ongoing service?
Yes — and that continuity is the point. Your as-builts, programming records and parts list stay in our file, so every later call is faster and cheaper.
More Magnetic Locks & Electric Strikes in Cheviot Hills
Magnetic Lock Installation in nearby cities
Explore
Book magnetic lock installation in Cheviot Hills
Licensed, insured and local. Fast scheduling across Los Angeles County — written quotes, warrantied work.
Call (888) 917-9811Sun–Thu 6:30 AM–11:30 PM · Fri 6:30 AM–4 PM