Electric Strike Replacement in San Dimas, CA
San Dimas · ZIP 91773 · Pomona Valley · Magnetic Locks & Electric Strikes

Los Angeles Access Control provides professional electric strike replacement for businesses, property managers and homeowners in San Dimas. From the first site walk to the final walkthrough, a single accountable crew manages the whole project — hardware and software alike.
Reach us now at (888) 917-9811 for a free estimate. We answer seven days' worth of long hours — 6:30 AM to 11:30 PM Sunday–Thursday, Fridays to 4 PM, so a local human answers your call, not a phone tree.
Electric strike replacement built for San Dimas
San Dimas sits in the Pomona Valley, and we know it street by street. From properties near Bonita Avenue or downtown San Dimas, or anywhere off the SR-57, we arrive with local knowledge of the construction styles typical of the 91773 area — everything from frameless glass entries to steel man doors — which means fewer surprises and faster installs.
Alongside San Dimas, the very same crew covers La Verne, Charter Oak, Glendora and Pomona, which means multi-site owners enjoy one vendor, one standard, one phone number: (888) 917-9811.
Early warnings worth acting on
Nobody can say how many keys exist for your doors — every unknown copy is an open question about who can walk in.
People prop doors to avoid fumbling with keys — and a propped door defeats every lock you own.
Repairs on the old system are becoming routine — the repair-versus-replace math eventually flips.
Staff or tenant turnover triggers a locksmith visit every time — electronic credentials turn that into a ten-second software change.
An incident happened and there's no record of who came in — audit trails are the first thing investigators and insurers ask for.
Any one of these justifies a conversation; stacking several means the risk is live. A phone consult costs nothing: (888) 917-9811.
Life-safety and code requirements
Electrified door hardware lives at the intersection of security and life safety. State and local codes govern how locked egress doors must release: motion-sensor REX, push-to-exit buttons, fire-alarm tie-ins and door release on power loss as each opening requires. Compliance is engineered in before security — because people always come before property.
Documentation is part of compliance: riser diagrams and test logs stay with your file, which keeps inspections and insurance reviews painless.
Our process, step by step
1. Assessment. A technician walks the property with you, recording door and frame construction, existing wiring, power availability and network paths. This produces a detailed scope and quote — no vague allowances.
2. Design. We pair hardware for each opening, size power supplies with battery backup, plan controller and network locations, and verify life-safety compliance before anything is ordered.
3. The install. Our own employees — not subcontractors — pull and label every cable, fit hardware precisely, and keep the site workable with minimal disruption.
4. Programming. Users, schedules and access levels are configured, time zones and holidays programmed, alarm behaviors tuned, and integrations (video, intercom, elevator) connected.
5. Commissioning. Every credential is tested at every relevant door, and your administrators are trained hands-on — with documentation left on site and on file with us.
6. Ongoing support. We keep your as-builts, programming records and parts list on file, which means future service calls are fast. Preventive maintenance plans are offered but never required.
Hardware and platforms we work with
Not all credentials are equal: old low-frequency prox is trivially copied, whereas modern smart cards and phone credentials are encrypted. We'll tell you plainly which you have and what it would take to upgrade.
Power is the silent failure point: undersized supplies, dead backup batteries and shared circuits are behind most "ghost" problems. We size power with headroom and battery backup as standard — and batteries get tested on every maintenance visit.
Choosing the right approach to electric strike replacement
Standalone hardware sits at the budget end: fine for a storage room or a single office door, though it leaves you without real records or remote control.
Networked on-premise systems put every door on one brain: powerful and subscription-free, at the cost of maintaining the server and software yourself. Best for facilities that already have IT staff.
Cloud access control trade a subscription for zero infrastructure: credentials, schedules and logs live in a web dashboard, local controllers keep decisions at the door even offline. It's what we'd put in our own building — though we'll say so only if it actually fits yours.
Not sure where you land? The free site survey settles it — our recommendation is the least system that fully solves the problem, with reasoning you can hold us to. (888) 917-9811.
One service, many names: what people search for
Whether you found us searching "electric strike repair", "electric strike not releasing", "electric strike replacement" or a phrase like them — the service behind the words is identical: a licensed technician, the right hardware, and a system commissioned to code in San Dimas.
Related work we handle under the same roof spans . Bundling related scopes into one visit beats hiring for them one at a time — one truck roll, one survey, one accountable vendor.
Why San Dimas calls us first
Non-proprietary by default. Open standards mean you own your system — though most customers never want anyone else.
Written, flat quotes. The number you approve is the number you pay. Change orders only happen when you change the scope.
One trade, deep focus. Entry systems are our entire business — not a line item for a general electrician.
Local and accountable. Based at 189 The Grove Drive in Los Angeles, serving every corner of LA County daily. When something needs attention, we're minutes away — not a ticket queue in another state.
Long hours, real answers. Open Sunday–Thursday 6:30 AM–11:30 PM and Friday to 4 PM. Entry failures don't respect business hours, so neither do we.
Backed work. Every installation carries labor and parts warranties, honored without arguments.
What our electric strike replacement service includes
The work includes everything from rim and mortise strike bodies to in-line power controllers, down to fail-secure and fail-safe strikes and frame cutting and reinforcement. Since one team handles the electrical, mechanical and software layers, accountability never splits.
Our techs install industry-standard, non-proprietary equipment wherever possible, which means you're never locked into one vendor for credentials, parts or service. When a proprietary legacy system is already in place, we can usually take it over, service it, or migrate it in phases.
Typical applications
Office doors — a property type we've equipped many times across LA County, with proven hardware packages ready to quote.
Medical suites — for which the system is tuned to traffic patterns, user counts and liability exposure, down to schedules and alert rules.
Apartment lobby doors — for which the system is tuned to the way the space is actually used, down to schedules and alert rules.
Storefronts — one of our most frequent project types, with reference sites we're happy to describe.
Running something different? We've likely done it — from houses of worship to film stages. Describe it at (888) 917-9811 and we'll talk through options.
Pricing factors for electric strike replacement
The honest answer: price follows scope — and we can pin it down quickly. The main drivers are: number of doors or gates, what each door is made of, how far and how hard the cable runs are, reader and credential choice, and whether locking hardware must be added or replaced.
Be cautious with phone-only pricing: unknowns get billed later one way or another. Our surveys are free, take under an hour for most properties, and lock your price in writing.
Problems we solve every week
Strikes chattering or sticking. It's among our most common calls — so we correct the underlying design, not just the broken part.
Doors needing release while staying locked outside. This one comes up weekly — and we correct the underlying design, not just the broken part.
Frames chewed up by old hardware. Correct design removes this risk — often in a single service visit.
Wrong voltage hardware burning out. A properly engineered system eliminates this entirely — usually within one scheduled visit.
Left alone, these issues get costlier: a door that fails unlocked is a security hole, and one that fails locked is a code violation. Fast scheduling are usually available at (888) 917-9811.
Jargon decoded
Anti-passback — a rule preventing a credential from entering twice without exiting, common in garages and secured floors.
Door position switch (DPS) — a sensor reporting whether the door is physically open or closed, enabling held-open and forced-door alarms.
Fail-safe vs. fail-secure — what a lock does when power drops: fail-safe releases (required for some egress doors), fail-secure holds (most strikes). Each opening gets the right one per code and risk.
OSDP — the modern, encrypted reader protocol replacing legacy Wiegand wiring that resists skimming and tamper.
Access level — which doors, at which times, for which users. Most messy systems are really access-level design failures.
Credential — the thing you present: card, fob, PIN, phone or fingerprint. Encryption level varies wildly between credential generations.
What working with us feels like
Door and gate failures ignore business hours, so our dispatch hours are long — Sunday–Thursday 6:30 AM to 11:30 PM and Friday to 4 PM — and same-day slots are held for genuine emergencies: a storefront that won't lock, a gate stuck open, a lobby door trapping deliveries. Describe the symptom when you call and you'll get an honest triage — if it can safely wait for a standard slot, we'll tell you.
The test of a contractor is the second call: warranty visits get the same priority as new sales, and the file we keep on your system means nobody re-learns your building on your dime.
Exactly where we work in and around San Dimas
Our San Dimas service area covers the entirety of ZIP code 91773 — including the areas near downtown San Dimas and Bonita Avenue, out to Raging Waters. Storefronts, offices, multifamily buildings and homes alike see the same technicians and the same pricing, reached via the I-10 and SR-57 and I-210.
Just outside San Dimas, we're equally active in La Verne, Charter Oak, Glendora, Pomona and Diamond Bar. Scheduling often pairs jobs across neighboring cities, which is part of why response here stays fast.
Mistakes to avoid when buying electric strike replacement
No documentation. No as-builts means the next tech starts blind. Demand as-builts and admin credentials in writing.
Proprietary lock-in. Certain platforms handcuff you to one company forever. Ask who else could service it before you sign
Phone-only quotes. The unknowns get billed later or botched. A real survey protects you — ours are free.
Leftover legacy credentials. An upgrade that keeps the old database keeps the old holes. We audit and purge on every system takeover.
Ignoring egress code. A maglock without compliant release mechanisms is a violation and a liability. Verify your installer designs for inspection.
The security details that separate good installs from bad ones
Attackers go around strong points, not through them: a maglock on a door whose glass sidelite opens with a rock, or a secured front door beside a propped loading dock, is theater. Our surveys look at the building the way an intruder would, so spend lands where risk actually lives.
Think about failure modes before they happen: power loss, dead internet, alarm activation — each scenario has a designed response, tested during commissioning, not during the real thing.
Electric Strike Replacement in San Dimas: FAQs
Can you service a system another company installed?
Usually, yes. We regularly take over systems whose installer disappeared — identifying the hardware, recovering or resetting programming, and documenting everything properly so you're never stranded again.
How long does an installation take?
A single door is typically done in a day. Larger systems scale with door count and wiring difficulty — your written quote includes a schedule, and we keep to it.
Are you licensed and insured?
Yes. Los Angeles Access Control operates as a licensed and insured contractor working across Los Angeles County, and we pull permits where the jurisdiction requires them.
Will the doors still open if the power goes out?
Yes — by design. Exiting is always possible: fail-safe hardware unlocks on power loss where code requires, and battery backup keeps systems running through outages. Power-loss behavior is part of our commissioning checklist.
Do you work on occupied buildings without disrupting tenants?
Yes, most of our work is in occupied buildings. We stage the work so entries keep functioning and coordinate notice with your manager.
What brands do you install?
Industry-standard platforms including HID, Brivo, Avigilon Alta (Openpath), DoorKing, ButterflyMX and Axis, with commercial-grade locking hardware throughout. The building's needs pick the brand.
How fast can you schedule electric strike replacement in San Dimas?
The majority of service calls are scheduled same-day or next-day, and new installations typically begin within days of an approved quote. We answer Sunday–Thursday 6:30 AM–11:30 PM and Friday to 4 PM at (888) 917-9811.
Is electric strike replacement disruptive to my business while it's installed?
Minimally. We stage work so doors stay usable, schedule noisy or door-down phases around your hours, and clean up every day. Most of our work happens in occupied, operating buildings.
Can you integrate with cameras, alarms or my property software?
Yes — door events paired with video clips, alarm tie-ins, elevator control and property-management integrations are routine for us. Bring your current system list to the survey and we'll map what connects.
Do you offer maintenance plans?
Yes — scheduled inspections, battery replacement, firmware updates and priority response, on terms you can cancel. Plans are optional — our work holds up either way.
Do you give free estimates?
Yes — site surveys and quotes are free and carry no obligation. The quote lists actual equipment and a locked price up front.
What happens when an employee or tenant leaves?
Their credential is deactivated in seconds — no rekeying, no lock changes, no cost. That single capability usually pays for the system.
Can I manage the system from my phone?
On modern cloud systems, absolutely: unlock doors remotely, grant visitor access, review events and get alerts from wherever you are. Ask for a demo at your survey.
Do you handle both installation and ongoing service?
Yes — that's central to how we work. Your as-builts, programming records and parts list stay in our file, so every later call is faster and cheaper.
Can the system lock and unlock doors on a schedule?
Absolutely: auto-unlock during business hours, auto-secure at night, with holiday calendars and exception dates handled automatically. No more "who forgot to lock up".
What if my building already has old wiring from a previous system?
Often good news: we test and reuse healthy legacy wiring, which cuts labor significantly. The survey includes testing what's in the walls — only what fails gets replaced.
Can I get temporary access for vendors, cleaners or contractors?
Yes — scoped, expiring credentials are one of the biggest wins: a cleaning crew gets specific doors, specific hours, auto-expiring, with every entry logged. No more lending master keys.
More Magnetic Locks & Electric Strikes in San Dimas
Electric Strike Replacement in nearby cities
Explore
Book electric strike replacement in San Dimas
Licensed, insured and local. Fast scheduling across Los Angeles County — written quotes, warrantied work.
Call (888) 917-9811Sun–Thu 6:30 AM–11:30 PM · Fri 6:30 AM–4 PM